Location:Home > Product Center
PURE PTFE POWDER
GENERAL PTFE COMPOUND
SPECIAL PTFE COMPOUND
MCN 10CAR
ff
Water and water-containing substances like most foods do not wet PTFE, therefore adhesion to PTFE surfaces is inhibited. Due to this property PTFE is used as a non-stick coating for pans and other cookware. It is very non-reactive, and so is often used in containers and pipework for reactive and corrosive chemicals. Where used as a lubricant, PTFE reduces friction, wear and energy consumption of machinery.
Technical Data Sheet
Composition: 10%Hard Carbon +90%virgin PTFE
Property | Measuring method | Units | NFF | FF |
Bulk density | ASTM D-4849 | g/L | 710 | |
Average particlesize,D50 | ASTM D-4894 | ?μm | 670 | |
Flow Index | INTERNAL | Sec/50g | 2.3 | |
Specific gravity | ASTM D-4894 | g/cm | 2.21 | 2.21 |
Hardness,Shore D | ASTM-D2240 | 66 | 66 | |
Tensile Strength | ASTM D4894 | M Pa | 26 | 28 |
Elongation atbreak | ASTM D-4894 | % | 350 | 347 |
Shrinkage | INTERNAL | % | 2.1 | 2.1 |
Recommended molding pressure | Kg/㎝2 | 500 | 550 | |
Max. sintering temperature | ℃ | 380 |