Location：
PURE PTFE POWDER
GENERAL PTFE COMPOUND
SPECIAL PTFE COMPOUND
MCN SUS 50
Water and water-containing substances like most foods do not wet PTFE, therefore adhesion to PTFE surfaces is inhibited. Due to this property PTFE is used as a non-stick coating for pans and other cookware. It is very non-reactive, and so is often used in containers and pipework for reactive and corrosive chemicals. Where used as a lubricant, PTFE reduces friction, wear and energy consumption of machinery.
Technical Data Sheet
Composition: 50% SUS + 50% virgin PTFE
| Property | Measuring method | Units | NFF | FF |
| Bulk density | ASTM D-4849 | g/L | 1280 | |
| Average particlesize,D50 | ASTM D-4894 | ?μm | 670 | |
| Flow Index | INTERNAL | Sec/50g | 2.3 | |
| Specific gravity | ASTM D-4894 | g/cm | 3.3 | 3.3 |
| Hardness,Shore D | ASTM-D2240 | 65 | 66 | |
| Tensile Strength | ASTM D4894 | M Pa | 23 | 25 |
| Elongation atbreak | ASTM D-4894 | % | 370 | 356 |
| Shrinkage | INTERNAL | % | 2.2 | 2 |
| Recommended molding pressure | Kg/㎝2 | 500 | 550 | |
| Max. sintering temperature | ℃ | 380 |